The pneumatic machine TP/LN-500/1 and /2 cuts the leads of any kind of radial components regardless of the diameter, material, pitch and form because it uses a cobalt “guillotine” blade. The upper plate which determines the cutting height (standard 3,2mm.125”) has always to be ordered separately by the machine because most of the times they have to be designed in special way to be adapted to the component requested height, forms and pitches.Additional plates to increase height can be supplied upon request.
Cutting area 53x43mm (2.09x1.7”) with Standard
Stationary plate 340111 to be separately ordered
Cutting area 53x93mm (2.09x3.66”) with Standard
Stationary plate 340211 to be separately ordered
This system automatically adjusts the bending wheels, reducing the set-up time and making it easier.
This system is available with the following versions of the TP6 machine: TP6/1/97 – TP6/4/97 and TP6/6/97.
Warning= the maximum pitch possible with the /97 system is 40 mm and the maximum “B” is 10 mm.