Features
Technical Information
SmartLog Pro® (SLP) Manager is distributed software system designed for control, monitoring, and management of SmartLog Pro® SE testers. The figure below illustrates the most basic and common
SmartLog Pro® Manager is only compatible with the SmartLog Pro® SE, and it is required for every SmartLog Pro® SE system installation. Contact EMIT Customer Service to schedule an online demo.
Features
SmartLog Pro® Manager automates the collection of ESD personnel grounding tests and maintains records for a Compliance Verification Plan as required by ANSI/ESD S20.20. It includes functions for tracking employee leave time, shift and department assignments, and ESD training accreditation. SmartLog Pro® Manager generates automated reports that may be e-mailed to track short term and long term corrective actions. Test limits and test parameters (wrist strap only, footwear only, wrist strap and footwear, etc.) may be customized with the web app to meet special requirements. SmartLog Pro® Manager may be configured to run in English, Spanish, Japanese, Chinese (Simplified), or Turkish.
Technical Information
Features
Alvarado EDM Key Features:
Added Benefits:
Technical Information
Download > 50173 - SmartLog Pro® SE with Motorized Turnstile, 100-200VAC Sheet
The EMIT SmartLog Pro® SE with Alvarado EDM Waist High Turnstile controls access to the ESD Protected Area to operators that have passed their pre-defined ESD tests and have been granted access to the area. The Alvarado EDM is a motorized waist high turnstile that provides single or bi-directional access control.
Upon loss-of-power or fire system input, the horizontal arm automatically drops to provide a clear exit passageway. Upon restoration of power or removal of the fire system input, the arms automatically re-engage to the normal operating position. The motorized arm rotation provides comfortable passage.
Features
Alvarado EDM Key Features:
Added Benefits:
Technical Information
TESTER WITH FOOTPLATE - Desco
The EMIT Dual Independent Footwear and Wrist Strap Tester is
designed to test personnel grounding devices, wrist strap and ESD footwear, to
satisfy the requirements of the ESD Association.
Specification
Operating
Voltage: 12 VDC
Test Switch
Voltage: 5 VDC @
open circuit
Wrist Strap and
Footwear Test Voltage: 12 VDC @ open circuit
Test Current: Limited by resistors and
varies on the test range setting
(100
kilohms - 1 gigohm)
Relay Contact
Rating: 1 A @ 30
VDC max
Temperature
Range: 41°F -
104°F (5°C - 40°C)
Operating
Conditions: Indoor
use only at altitudes less than 6500 ft. (2 km)
Maximum relative humidity of
80% up to 88°F (31°C)
decreasing linearly to 50% @ 104°F
(40°C)
Maximum relative humidity of
50% at 1 Gigohm setting
Pollution
Degree: 2 per
IEC 644
Features
·
Wrist strap and ESD footwear system testing
·
Three tests at the same time; depress contact once to test
footwear and wrist strap independently
·
Split foot plate design
·
Independent alarming conditons
·
Relay for door locking systems
·
Can test both single and dual-wire wrist straps
·
Calibrate with the 50424 Limit
Comparator
·
Made in the United States of America
Download > 50413 - DUAL INDEPENDENT FOOTWEAR AND WRIST STRAP Sheet
FOR PERIODIC TESTERS - Desco
Features
Picture > 50424 - LIMIT COMPARATOR Picture
Download > 50424 - LIMIT COMPARATOR Sheet
Specification
Features
Use the EMIT SmartLog V5™ turnstile
to enforce ESD access control in your facility. The EMIT 50772 turnstile is
constructed of high quality stainless steel and includes a SmartLog V5™ with
mounting fixture. The turnstile will activate when a user passes their required
ESD test. Use the turnstile’s integrated timer to set it’s unlock time to 5,
10, 15 or 20 seconds.
*U.S. Patent 6,078,875 and
6,809,522
“Compliance verification records
shall be established and maintained to provide evidence of conformity to the
technical requirements. The test equipment selected shall be capable of making
the measurements defined in the Compliance Verification Plan.” [ANSI/ESDS20.20-2007
section 7.3]
“Access to the EPA shall be limited to personnel who have completed appropriate ESD training. Untrained individuals shall be escorted by trained personnel while in an EPA [ESD Protected Area].” [ANSI/ESD S20.20 section 8.3]
Download > 50772 - SmartLog V5™ - Desco Sheet
With Proximity and Barcode Readers
New Features
Features
Technical Information
https://www.descoindustries.com/PDF/TB-6594.pdf
Download > 50780 - SmartLog Pro® Sheet
Desktop Permanent License - DESCO
Features
50364 - TEAM6 DESKTOP PERMANENT LICENSE
50365 - TEAM6 SERVER PERMANENT LICENSE
Download > TEAM 6 (Data Acquisition) Sheet