The Best Coil Potting Compounds for Many Applications
Epic Resins complete line of epoxy resin polyurethane electrical potting and encapsulating compounds for coils are designed to have superior electrical insulating properties. When potting electronics, it is important to have superior resistance to environmental factors while ensuring exceptional insulation of electronic components.
The potting material we construct is of the highest caliber with supreme resistance to chemicals, wear, moisture and other hazards. Our encapsulates come in a wide range of viscosities specially designed for difficult to impregnate coil assemblies. Below are just a few examples of electrical potting compounds that are being used today. The automotive industry utilizes these encapsulation compounds to protect ignition coils and ensure smooth car start-up.
Epic 0156 - Single Component Epoxy Resin Potting Compound
Epic 0156 is a single component 100% solids epoxy resin potting compounds designed for impregnation of coils, transformers, motors and other electrical items needing insulation. The epoxy potting material also provides outstanding protection from vibration and corrosive agents, which can damage the electrical components. This epoxy encapsulate has outstanding shelf stability, low viscosity and good electrical properties.
Epic R3521/H5094 - 2 Component Epoxy Potting Compound
Epic R3521/H5094 is a black two component epoxy potting compound. Epic R3521/H5094 features a convenient 1:1 mix ratio, low viscosity and ambient temperature cure. Epic R3521/H5094 is designed for heavy duty potting electronics, and this potting compound allows for high electrical insulation with extensive protection from environmental hazards. Epic R3521/H5094 has been developed as a production friendly, room temperature cure electrical potting compound for the impregnation of high voltage coils.
Epic S7214- 2 Component Polyurethane Potting/Casting Compound
Epic S7214 is a two component polyurethane potting/casting compound. S7214 has been designed with a fast gel time and rapid hardness development. Epic S7214 potting material has extraordinary electrical insulation properties combined with advanced protection against corrosive elements and vibration. This polyurethane potting compound has been formulated for applications where excellent chemical resistance at ambient and elevated temperatures is an important design criterion. When mixed, S7214 results in dark green colored castings.
Epic S7207 - 2 Component Polyurethane Potting Compound
Epic S7207 is a two component elastomeric polyurethane system designed for potting electrical components. With fantastic thermal transfer properties, Epic S7207 potting compound provides phenomenal electrical insulation and environmental protection. It features a high dielectric strength and hardness in the mid Shore A range. Epic S7207 polyurethane potting compound is especially suited for high temperature applications.
Epic S7318 - 2 Component Urethane Potting Compound
Epic S7318 is a two component urethane potting compound that is designed for high voltage ignition coils. Epic S7318 features low hardness, low mixed viscosity and a long pot life at room temperature. Epic S7318 potting material allows for outstanding electrical insulation and thermal management, while providing protection from corrosion and other environmental factors. Epic Resins S7318 offers excellent performance over a wide temperature range, it is especially suited for under the hood automotive applications.
Epic S7230 - 2 Component Epoxy Resin Potting Material
EPIC S7230 is a medium viscosity, two component epoxy resin system designed for potting or encapsulation of electrical components. Designed for high voltage coils, this potting material is impervious to vibration and shock, and protects from moisture and other corrosive elements. Epic S7230 is a potting compound which offers exceptional electrical insulation and thermal management for increased coil life and performance. S7230 features nonabrasive fillers, convenient 2:1 mix ratio and improved resistance to thermal shock.
Epic S7368 - 2 Component Polyurethane Potting Compound
EPIC S7368 is a low hardness, low viscosity polyurethane electrical potting compound. Powerful, durable potting material, Epic S7368 offers premium resistance to corrosive and environmental hazards, while providing substantial electrical insulation. S7368 is a two component, polybutadiene based urethane material useful in applications requiring a long pot life while possessing excellent high temperature performance.
Electronic Control Module Potting and Encapsulating Compounds
The Best Potting and Encapsulating Products for Control Modules
Epic Resins has a full line of electronic potting compounds designed to protect your control module from the elements, whether chemical or natural. These electric potting resins are an excellent encapsulation compound for a variety of small, sensitive electronics. The low viscosity potting compounds easily reach intricate, detailed part of you control modules and other similar electronic devices. Sensitive components are well protected and held stable with any of our high quality electric potting compounds. There are ways to remove epoxy for your potting too if you need to repair or modify an electric component.
Our epoxy and polyurethane encapsulants are used in environments that require good thermal shock and vibration resistance, as well as resistance to harsh chemicals. We manufacture custom formulated epoxy resins for a wide range of applications. Whether you are looking for a thermally conducive potting compound for your control module or a custom potting resin for your unique electrical application, the experts at Epic Resins can help you.
Epic S7310 - 2 Component Urethane Potting Compound
Epic S7310 is a black two component urethane potting compound that features:
Based on thermally aging data, Epic S7310 will work in the -55C to 125C operating range, providing stress relief to sensitive surface mount components.
Epic S7351 - 2 Component -Room Temperature -Polybutadiene Based Polyurethane
Epic S7351 is a two component, room temperature cure, polybutadiene based polyurethane potting compound. Epic S7351 was specifically formulated for electronic marine modules (EMM's) and is also an excellent candidate for electronic control modules (ECM's). Due to its low hardness and flexibility, S7351 will not exert stress on delicate surface mounted devices (SMD's) on printed circuit boards (PCB's) when exposed to extreme thermal cycling typical of marine and automotive electronics applications. This polyurethane potting compound is an excellent alternative to rigid systems that do not allow expansion and contraction of delicate components, causing failures. Also, due to the polybutadiene chemistry used in this formula, the product provides excellent high temperature properties up to 125C and much improved chemical resistance.
Epic S7475 - 2 Component Polyurethane Potting Compound
Epic S7475 is a two component polyurethane potting compound that was formulated for potting electronic control modules (ECM's). The low mixed viscosity of S7475 allows the material to flow into intricate places under printed circuit boards and other tight tolerance areas in a wide variety of electronic devices. Another key property of this product is the 4:1 by volume mix ratio that makes the system very adaptable to meter mix and dispense applications. Offering a hardness of Shore OO = 50-65, S7475 provides excellent flexibility, therefore allowing delicate surface mounted devices (SMD's) to expand and contract during thermal shocks and thermal cycling. This polyurethane potting compound is also flame retardant, being UL 94V0 recognized at 5.4mm. For applications that generate a great deal of heat, this product is also an excellent choice due to its low weight loss at elevated temperatures. S7475 has shown extremely low weight loss at 130C - 0.24% after 168 hours.
Epic S7391-03 - 2 Component Polyurethane Gel Potting Compound
Epic S7391-03 is a two component polyurethane gel potting compound designed for potting sensitive electrical components. Epic S7391-03 features a convenient 1:1 volumetric mix ratio as well as a very low mixed viscosity. Epic S7391-03 encapsulating urethane makes an excellent replacement for more expensive silicone potting materials.
Epic S7325 - Aromatic Urethane Potting Compound
Epic S7325 is a low hardness aromatic urethane potting compound. S7325 has been designed with a convenient 1:1 by volume mix ratio. Epic S7325 is especially useful for applications requiring removal of the potting material for easy access to circuitry and components so that repair can be performed on expensive control modules. S7325 has a proven track record of performance in under the hood automotive applications.
Epic S7302 - Polyurethane Room Temperature Cure System
Epic S7302 is a tough, medium durometer, polyurethane potting and encapsulating material. S7302 is a room temperature cure system that may be accelerated by increased temperatures. S7302 is suitable for applications that require operating temperatures between 110 to 120C. Epic S7302 exhibits good adhesion to many types of thermoplastic cases, without the need for surface preparation. Epic S7302 is a great product for applications that will see vibration, thermal cycling and/or thermal shock.
Epic S7287 - 2 Component Polyurethane Potting Compound
Epic S7287 is a low cost, two component polyurethane potting compound that is used in various electrical and electronic potting applications. Epic S7287 features a low viscosity which imparts good flow-ability for the ease of potting of parts. Epic S7287 is recommended for products that require the encapsulating compound to flow into intricate and tight tolerance designs.
Epoxy and Polyurethane Potting and Encapsulating Compounds for Microelectronics
High Quality Microelectronics Potting and Encapsulating Formulations and Products
Epic Resins has formulated a host of epoxy and urethane potting and encapsulating compounds designed to be used in microelectronic applications. Polyurethane covers a broad range of materials and can replicate virtually any type of hardness for products including gel, glass, thermoplastics, rubber, and LED compounds. Your polyurethane compounds can be formulated to resist chemicals, weather damage, and vibration, depending on the formulation you choose. Our polyurethane potting compounds also provide excellent insulating abilities for applications requiring electrical properties. Choose from formulations varying in thickness, consistency, viscosity, and other specifications depending on your industry and application. The polyurethane potting compound manufacturers at Epic Resins offer over the phone quotes for those who need help choosing the right formulation. No matter what your industry specifications, we offer the best polyurethane compounds for your needs. Our consistent quality means that you will have a repeatable process for high volume production.
Polyurethane Potting Compounds for Electronics
Electronic polyurethane potting compounds create a method of insulation for products used in automotive, electrical, and aerospace industries. Epic Resins carries a wide range of polyurethane potting compounds for electronic and microelectronic applications, manufactured in our state of the art facility. Our potting compounds are designed to meet every customer’s expectations and create high quality, long-lasting electric components and products. Electrical potting compounds formulated by Epic Resins protect delicate components like circuit boards, cable joint assemblies, and control boxes, maintaining the quality of your products. Our epoxy potting encapsulation can be removed with proper technique and delicate handling. Plus, you'll never have to worry about shock and vibration damage when you utilize our high quality, cost-effective polyurethane potting compounds.
Below are a few examples of the polyurethane and epoxy resin potting and encapsulating compounds that are being used in the manufacture of microelectronics devices.
Contact our electrical potting compound experts today for a microelectronic encapsulation resin with exceptional support of small components.
Epic S7356 - 2 Component Polyurethane Potting/Encapsulating Compound
Epic S7356 two component polyurethane potting and encapsulating compound was specifically formulated for automotive sensors, switches, and other electrical devices requiring protection from "under the hood" environments. Epic S7356 has successfully passed automotive thermal shock and thermal cycling evaluations and has also proven itself in the field in a wide range of automotive applications. This urethane potting and encapsulating compound features a convenient 1:1 by volume mix ratio and low viscosity that makes it very accommodating to meter mix and dispense applications. Another key feature of this system is that it offers a very fast room temperature gel time in a small mass making it an excellent system for applications requiring small amounts of potting/encapsulation. The fast gel time provides the advantage of rapid cycling of parts. The Shore A = 60-65 hardness range is also a valuable feature allowing delicate components to expand and contract when exposed to temperature swings without causing physical stress that can create failures.
Epic S7360 - 2 Component Polyurethane Potting/Encapsulating Compound
Epic S7360 is a clear, two component polyurethane electronic potting and encapsulating compound. S7360 is designed with a low Shore OO hardness and good electrical properties which make it an excellent replacement for more expensive silicones.
Epic S7130 - 2 Component Epoxy Potting/Encapsulating Compound
Epic S7130 is a two component epoxy potting and encapsulating compound. S7130 has been designed for the potting and encapsulation of small components where a fast cure at room temperature is an important design criteria. S7130 features a convenient 2:1 by volume mix ratio and is well suited for small shot dispensing on meter-mix dispense equipment.
Epic S7376 - 2 Component Polyurethane Potting Compound
The S7376 two component polyurethane potting compound was specifically formulated for automotive sensors, switches, and other electrical devises requiring protection from "under the hood" environments. The S7376 has successfully passed automotive thermal shock and thermal cycling evaluations and has also proven itself in the field in a wide range of automotive applications. The S7376 features a convenient 1:1 by volume mix ratio that makes it very accommodating to meter mix and dispense applications. Another key feature of this system is that it offers a very fast room temperature gel time in a small mass making it an excellent system for applications requiring small amounts of potting. The fast gel time also provides the advantage of rapid cycling of parts. The Shore A = 60-65 hardness range is also a valuable feature that allows delicate components to expand and contract when exposed to temperature swings without causing physical stress that can create failures. As with all polyurethane chemistries, the S7376 requires safe handling precautions such as desiccant canisters in drum bungs and inert gas purging of opened containers with nitrogen or argon. Moisture contamination of the product should be avoided at all costs as the product will react with moisture to produce CO2 as a byproduct causing failures.
Epic S7405 - 2 Component Polyurethane Potting Compound
Epic S7405A/B is a two component polyurethane potting compound. S7405 has been designed with a convenient 1:1 by volume mix ratio and a fast gel and cure time. Epic S7405 encapsulating compound allows for the quick cycling and packaging of parts after dispensing.Epic S7360 - 2 Component Polyurethane Potting/Encapsulating Compound
High Performance Epoxy Resins for Motor and Stator Windings
Motor and Stator Epoxy Resin Encapsulant Products
Epic Resins manufactures a full line of epoxy resin encapsulants for motor and stator windings. Our chemically resistant, high temperature epoxy resins will withstand your most demanding application. These thermally conductive potting compounds feature a long shelf life, ensuring our products fulfill your potting compound needs over an extended period of time. With superb electrical properties, these potting resins are perfect for a wide range of electrical and automotive uses. Epic Resins’ manufactures a variety of electric potting compounds come in a wide range of viscosities, gel times, and cured physical properties, making them ideal for almost any electrical application.
Our custom epoxy resin formulations ensure you will find the perfect potting compound for your motor and stator windings, or other electrical use. With high heat deflection, excellent heat transfer properties, and a variety of physical properties, Epic Resins’ has the potting resin you’re looking for.
Epic 0140 - 1 Component Epoxy Resin
Epic 0140 is a single component 100% solids epoxy resin system designed for impregnation of coils, transformers, motors and other electrical items needing isulating. Epic Preg 0140 has outstanding shelf stability, very low viscosity and good electrical properties. Epic Preg 0140 can be used as a potting resin, dip process resin, or V.P.I. Resin system. Epic Preg 0140 is filled with silica for systems that require thermal conductivity
Epic 0130 - 1 Component Thixotropic Epoxy Compound
Epic Preg 0130 is a rigid, heat curable single component, thixotropic epoxy compound. Epic Preg 0130 features a 100% reactive, high heat deflection temperature, excellent electrical and heat transfer properties, and a long shelf life.
Epic 0155 - 1 Component Anhydride Cure Epoxy
Epic 0155 is a one component anhydride cure epoxy which can be used in both casting and small potting applications. With a low viscosity, Epic 0155 is excellent in penetrating and sealing tightly wound coils.
Epic 0171 - 1 Component Epoxy Resin
Epic 0171 is a single component, 100% solids epoxy resin system designed for the impregnation of coils, transformers, motors and other electrical items needing insulating. Epic 0171 has outstanding shelf stability, low viscosity and good electrical properties.
Epic X93C1961 - 1 Component Thixotropic Epoxy Compound
Epic X93C1961 is a single component thixotropic epoxy compound that is 100% reactive and has a high heat deflection temperature. This product also has excellent electrical and heat transfer properties, and a long shelf life.
EPIC 0156 is a single component 100% solids epoxy resin system designed for impregnation of coils, transformers, motors and other electrical items needing insulating. Epic 0156 has outstanding shelf stability, low viscosity and great electrical properties.
EPIC 0215 features 100% reactive materials, a high heat deflection temperature, excellent electrical and thermal conductivity properties with a long shelf life. It can be used as a wet-winding/brushing compound for rotating or field coils which require high bond strength.
EPIC 0216 is a single component, thixotropic epoxy compound. It features a long shelf life, controlled thixotropy, and excellent electrical and physical properties. It is designed for encapsulation and impregnation of stator end windings through the use of vacuum/pressure impregnation (VPI).
Radio Frequency Potting and Encapsulating (RF)
Radio Frequency Application Epoxy Adhesives and Polyurethane Potting Compounds
We have a variety of epoxy adhesives and polyurethane compounds for potting radio frequency devices such as automatic meter readers (AMR's). The low dielectric constant up to 1 GHz can be used for applications in frequencies of 433/868 MHz band. We also have adhesives for low frequency transmission over short distances such as security card readers.
Our epoxy and polyurethane potting compounds are excellent for a wide variety of radio frequency and wireless sensor applications including Tire Pressure Management Sensors (TPMS). If you require optimal clarity we have clear compounds. This is useful in water and gas meter reading devices where you need to read a barcode. Our epoxy adhesives are also crack resistant. Low Tg (glass transition temperature) and low hardness are suitable for outdoor applications to protect electronics from harsh conditions.
See our brochure below to find the material perfect for your radio frequency application. If you need help selecting the correct material one of our epoxy resin and polyurethane technical sales staff will help you select the best material for your manufacturing project.
If you do not see an epoxy adhesive fitting your needs, we can custom develop one for you in our state-of-the-art research laboratory.
Thermally Conductive Epoxy Potting Compounds
Thermally Conductive Epoxy Potting Compounds for Relays, Resistors and Capacitors
Utilizing the right thermally conductive epoxy potting compounds is critical for producing quality parts, components, and other products requiring conductivity. Epic Resins manufactures various thermally conductive epoxy potting and encapsulating compounds to meet your electrical insulation needs when it comes to the manufacturing of your relays, capacitors, or resistors. Our thermally conductive epoxy compounds are unparalleled in strength and provide outstanding heat transfer and dissipation. They can replicate different hardness levels ranging from gel to glass. Manufactured in our state of the art facility, our thermal potting compounds are custom made to fit each customer’s specifications. Thermal potting compounds formulated by Epic Resins feature excellent resistance to shock, vibration, chemicals, and extreme temperatures, maintaining the quality of your products. Use our thermally conductive epoxy potting compound formulations for all of your relay, resistor, and capacitor application needs as well as LED packaging, power supplies, and other electronic products requiring superior conductivity and durability. With a variety of electric potting compound options which feature low temperature cures, great electrical properties, and excellent structural integrity, Epic Resins has an epoxy resin for every application.
Thermally Conductive Potting Compounds for Electronics
Electronic components can be damaged by moisture, corrosion, and extreme temperatures when not protected. Our thermal potting compounds enable even heat distribution, preventing overheating and short circuits. We carry both one and two component compounds which are all 100% solvent free. After using our thermally conductive epoxy potting compounds on your electronic applications, it will quickly cure and harden, permanently protecting fragile electrical components. Using special techniques you can remove epoxy potting for reasons such as modifying or repairing a component.
Industries which use thermal potting compounds include, but are not limited to:
Epic Resins thermally conductive potting compounds can be designed to fit your requirements for processing as well as end use. Whether you are looking for a high temperature potting compound for relays, resistors and capacitors or an epoxy resin for potting electronics of all types, Epic Resins has the high quality epoxy compounds for you.
Contact our epoxy resin formulators today for thermally conductive potting compounds for your relays, resistors, or capacitors.
Epic 0154 - 1 Component Thermally Conductive Epoxy Potting Compound
Epic 0154 is a low-temperature cure, thermally conductive epoxy potting compound for electrical components. Epic 0154 features low temperature cure, good electrical properties, minimal settling characteristics and good heat transfer in a single component epoxy. Epic 0154 thermally conductive epoxy has supreme structural strength and integrity to provide long lasting, reliable performance. Epic 0154 has excellent shelf life stability for a one component heat cure epoxy resin.
Epic R1009/H5017 – Thermally Conductive Epoxy Resin Compound
Epic R1009/H5017 is a filled, high viscosity, thermally conductive epoxy resin system. The resin is stabilized to permit successful use of dispensing equipment as well as manual batch processing. Epic R1009/H5017 thermally conductive epoxy resin is strong and has excellent structural integrity which won’t be compromised by extreme heat or environmental factors. The substantial heat transfer and electrical insulation properties of the R1009/H5017 compound provide exceptional performance. R1009/H5017 is a room temperature electrical potting compound that has been successfully used in a variety of applications such as capacitors, diodes, resistors and torchheads.
Epic 0126 - 1 Component Thermally Conductive Epoxy Potting Compound
Epic 0126 is a thermally conductive potting compound and/or adhesive for electrical components featuring good electrical properties, minimum settling characteristics and good heat transfer in a single component epoxy. With strong structural integrity, this thermally conductive epoxy compound offers long lasting, reliable performance. Applications for 0126 include coils, electronic encapsulation and relay encapsulation.
Epic S7076 - 2 Component Thermally Conductive Epoxy Compound
Epic S7076 is a two component, 100% reactive, electrically and thermally conductive epoxy compound. S7076 has been designed as cushioning compound to act as an interface between the metal pole piece and the rigid epoxy on an electrical bushing. S7076 has a strong, inherently rugged structure to offer superior performance, even under harsh conditions. S7076 eliminates stress fractures in the epoxy compound that results in corona discharge failures. Epic S7076 adheres well to most metals and is designed to prevent running and dripping during application.
Epic S7133 - 2 Component Thermally Conductive Epoxy Potting/Casting Compound
Epic S7133 is a general purpose, two component, thermally conductive epoxy potting/casting compound. Epic S7133 has been designed with a convenient 1:1 mix ratio by weight or volume and uses a less abrasive filler making S7133 suited for meter-mix dispense applications. Epic S7133 is a thermally conductive epoxy with a strong internal structure to perform in an exceptional way under the harshest circumstances. Epic S7133 lends itself well to applications where good electricals and good thermal conductivity are required in a room temperature curing system.
Epic S7188-02 - 2 Component Thermally Conductive Epoxy Potting/Casting Compound
Epic S7188-02 is a fire resistant, two component, filled epoxy potting and casting system. Epic S7188-02 features a low mixed viscosity to allow for complete air release, a convenient mix ratio and very low shrinkage upon cure. Epic S7188-02 provides excellent heat transfer and is designed with a rugged strength for long lasting performance. Epic S7188-02 is recognized UL 94V-0 at 5.7 mm.
Epic R1015/H5005 – Thermally Conductive Epoxy Potting Compound
Epic R1015/H5005 is an thermally conductive epoxy that excels as a potting compound in a variety of electronic applications. The major features of the system include a stabilized filler to reduce settling and minimal development of stresses after curing. The latter feature especially qualifies this system for use with delicate and heat sensitive electronic packages. Epic R1015/H5005 thermally conductive epoxy offers heavy duty vibration and elemental protection in a strong, durable structure to provide long lasting electronic performance.
Epic R1000-01/H5000-01 – Thermally Conductive Epoxy Resin
Epic R1000-01 is a filled high viscosity, modified thermally conductive epoxy resin. The resin is stabilized to permit successful use of dispensing equipment, as well as manual batch processing. Room temperature and elevated temperature curing options are available. R1000-01 has a high quality structure designed with exceptional strength and heat transfer properties. When combined with appropriate hardeners, Epic R1000-01 resin has been successfully used in a variety of applications such as capacitors, resistors, diodes and torchheads.
Epic S7397-01 - 2 Component Thermally Conductive Epoxy Potting Resin
Epic S7397-01 is a two component electrical grade thermally conductive epoxy potting resin. Epic S7397-01 is designed with a convenient 1:1 by weight or volume mix ratio along with a long gel time and slow cure. Epic S7397-01 thermally conductive epoxy combines superior structural integrity with exceptional heat transfer properties for high quality performance. Epic Resins S7397-01 is non-blushing, resulting in attractive parts when cured. S7397-01 is recognized by UL, meeting the 94 V-0 fire retardancy standard.
Epoxy and Polyurethane Encapsulants for Sensors
Electronic Sensor Encapsulant and Potting Compounds
Epic Resins epoxy resin and polyurethane encapsulating compounds are designed to protect your sensors from the environment. Whether you are manufacturing an under the hood sensor for an automotive application or a sensor that must withstand a harsh chemical or physical environment such as Tire Pressure Management Sensors (TPMS), Epic Resins will work with you to select or design a potting compound to meet your needs.
Epic S7151 - 2 Component Epoxy Resin Electrical Potting/Casting Compound
Epic S7151 is a two component general purpose epoxy resin electrical potting/casting compound. Epic S7151 is an excellent choice for many electrical potting applications and features a meter-mix friendly 3:1 mix ratio, very low shrinkage and good adhesion to both metal and plastic cases. S7151 retains a high gloss in the cured state resulting in very attractive parts.
Epic S7224 - 2 Component Epoxy Potting Compound
Epic S7224 is a two component epoxy potting compound. S7224 is thermally conductive in order to transfer heat out of parts potted with it. Epic S7224 is especially useful in harsh, under-the-hood automotive applications requiring a durable, chemically resistant epoxy potting compound.
Epic S7341 - 2 Component Epoxy Potting/Encapsulating Compound
Epic S7341 is a two component epoxy potting and encapsulating compound designed with a low exotherm and a convenient 2:1 by volume mix ratio. Because of its high clarity, Epic S7341 is used in applications where items such as barcodes must be read through the potting compound.
Epic S7379 - 2 Component Epoxy Potting Compound
Epic S7379A/B is a two component epoxy potting compound designed to provide crack resistance in applications requiring harsh thermocycling of the encapsulated part. Epic S7379 displays good adhesion to most metal and plastic cases. With these two characteristics, Epic S7379 is an excellent choice for applications encountering problems due to moisture infiltration.
Epic R1016/H5008 - Impact Resistant Potting System
EPIC R1016/H5008 is an impact resistant potting system that has been qualified per NAV AIR drawing 790AS743. The system has been approved especially effective for potting electronic components used in a variety of ballistic vehicles. Delicate components, e.g. glass diodes, should be coated with a resilient material such as silicone rubber to minimize stresses developed during curing.
Epic S7280 - Tough, Flexible Tire Pressure Management Sensor (TPMS) Potting Compound
Epic S7280 is a 2 component flexible polyurethane potting compound that will not interfere with RF signals sent from TMPS sensors. This Shore A 45 encapsulant has a low mixed viscosity allowing it to flow into tight tolerance areas common to TMPS applications. The material comes in a variety of gel times and colors to suit the end user requirements.
Epoxy Potting Compounds for Submersible Pumps
Thermally Conductive Submersible Pump Potting and Casting Compounds
Epic Resins epoxy potting compounds for the submersible pump market have a proven track record of excellent field performance. Look no further than Epic Resins for a product that will produce a quality, consistent result in your application. The submersible pump potting compounds from Epic Resins are designed to provide extremely low water absorption, good chemical resistance and exceptional thermal conductivity. With a variety of submersible pump potting compounds, you will find the perfect solution to your unique pump needs. Electrical insulation and room temperature cure features make our epoxy potting compound ideal for submersible pumps and a wide variety of electrical use.
We also provide custom epoxy potting compound formulations to ensure you find the ideal potting compound for your unique application. When you are looking for low viscosity potting compound with excellent electrical and thermal properties for submersible pumps or other electrical applications, trust the epoxy manufacturers at Epic Resins.
Epic S7136 - 2 Component Epoxy Potting/Casting Compound
Epic S7136 is a two component epoxy potting/casting compound. Epic S7136 has been designed for applications that require low water absorption and good chemical resistance in conjunction with good thermal conductivity. When cured for 1 hour @100C, Epic S7136 has outstanding chemical resistance and has shown no physical breakdowns after a 1 year soak in methylene chloride.
Epic S7414-01 - 2 Component Epoxy Potting Compound
Epic S7414-01 is a two component epoxy potting compound designed to provide electrical insulation in a room temperature cure material. Epic S7414-01 offers a low viscosity and good thermal management.
Epic S7236 - 2 Component Epoxy Potting Compound
Epic S7236 is a two component epoxy potting compound. This low viscosity epoxy features excellent penetration of intricate parts while providing excellent thermal and electrical properties.
Electrical Potting Compounds for Switches and Connectors
Sensor Encapsulating Products with Epoxy and Polyurethane Compounds
With a full line of epoxy resin and polyurethane potting compounds being used for protection of switches and connectors, Epic Resins can provide you with a material to fit the requirements of your application. Switches and connectors require an epoxy potting compound with exceptional electrical properties. Our line of electronic potting compounds for switches and connectors feature excellent shelf life, medium to low viscosity and great penetration in tight components. Our thermally conductive potting compounds are ideal for switches, connectors, sensors and a wide variety of electrical applications.
Our staff of epoxy resin manufacturers has years of experience formulating epoxy potting compounds for a variety of uses. We offer custom electronic potting compound formulation to ensure you find the switch or connector epoxy compound you need. Whether you are looking for a consistently superior electrical potting compound or custom polyurethane resin for you unique application, Epic Resins has the affordable products for you
Epic R1074-06/H4030-02 - Epoxy Potting Compound
Epic R1074-06/H4030-02 is a premium, UL 94 V-0 recognized fire retardant epoxy potting compound that features excellent electrical properties and a long working life. Epic Resins R1074-06/H4030-02 has a low viscosity to help with flow and penetration in tight tolerance applications.
Epic 0154 - Epoxy Potting Compound
Epic 0154 is a low-temperature heat cure, thermally conductive epoxy potting compound for electrical components. Epic 0154 features good electrical properties, minimal settling characteristics and good heat transfer in a single component epoxy. Epic 0154 has excellent shelf life stability for a one component heat cure epoxy resin. Epic 0154 also boasts a medium to low viscosity not usually associated with such a heavily filled system.
Epic S7356-2 Component Polyurethane Potting Compound
Epic S7356 two component polyurethane electrical potting compound was specifically formulated for automotive sensors, switches, and other electrical devices requiring protection from "under the hood" environments. Epic S7356 has successfully passed automotive thermal shock and thermal cycling evaluations and has also proven itself in the field in a wide range of automotive applications. This urethane potting compound features a convenient 1:1 by volume mix ratio and low viscosity which makes it very accommodating to meter mix and dispense applications.
Another key feature of this system is that it offers a very fast room temperature gel time in a small mass making it an excellent system for applications requiring small amounts of potting. The fast gel time provides the advantage of rapid cycling of parts. The Shore A = 60-65 hardness range is also a valuable feature allowing delicate components to expand and contract when exposed to temperature swings without causing physical stress that can create failures.
Epic S7317A/S7317-01B - Filled -Room Temperature Epoxy Potting System
Epic S7317A/S7317-01B is a filled, room temperature cure epoxy potting system with a 1:1 by volume mix ratio and a high gloss. Epic S7317A/S7317-01B is an excellent, economical choice for ease of use in general purpose encapsulation applications.
Potting and Encapsulating Compounds for Telecommunications Devices
Urethane and Epoxy Resin Potting Compounds for Telecommunications Systems
Epic Resins manufactures a variety of low cost urethane and epoxy resin potting compounds that stand up to the demanding applications in the telecommunications industries. Our potting compounds will protect your equipment from the most demanding of environments. Our line of epoxy resins for telecommunication application is designed with electrical properties which keep your application protected and working exceptionally well. We offer everything from clear potting compound and thermally conductive epoxy to polyurethane compounds with good hydrolytic stability and low hardness to ensure you find the perfect solution to your specific telecommunication needs.
Our polyurethane resin suppliers have years of experience providing a wide range of epoxy resins and potting compounds for a variety of applications. We offer custom epoxy resin formulation for telecommunication industries to ensure we offer the most comprehensive epoxy resin options available. Trust Epic Resins’ electronic potting compound experts to provide you with exceptionally superior customer services and consistently high quality epoxy resins and potting compounds.
Epic S7260 - 2 Component Urethane Potting Compound
Epic S7260 is a two component urethane potting compound with a convenient 3:1 by volume mix ratio. S7260 has a standard 15 minute gel time that can be adjusted upon request. Epic S7260 is an excellent choice for cable splicing or junction potting.
Epic S7144 - 2 Component Polyurethane System
Epic S7144 is a two component polyurethane system designed for potting electrical and electronic devices. S7144 lends itself well to sand impregnation and offers good hydrolytic stability. S7144 has a convenient 3:1 by volume mix ratio and has a Shore A hardness of 80.
Epic S7360 - 2 Component Urethane Potting/Encapsulating Compound
Epic S7360 is a clear, two component urethane potting and encapsulating compound. S7360 is designed with a low hardness and good electrical properties which make it an excellent, economical replacement for silicones.
Epoxy Resin Varnishes and Encapsulants for Transformers
Transformer Electronics Resins and Encapsulants
Epic Resins manufactures a full line of formulated epoxy resin systems for use in transformer applications. These epoxy resin formulations are specifically designed for use with high temperatures, high voltage applications, and electrical applications. With a wide range of viscosities these epoxy resin formulations are perfect for a variety of unique uses. Depending on your application requirements we have transformer epoxy resin with any level of thickness. We also create custom epoxy resin formulations to ensure you find the perfect solution to your needs.
With good physical and electrical capabilities, our transformer epoxy resins assist your products in performing at their best. Whether you are looking for a UL recognized varnish, or a system to encapsulate your transformer, Epic Resins can help you select a product for your needs.
Epic S7478 - 2 Component Polyurethane Potting Compound
The Epic S7478 is a two component polyurethane potting compound designed for use in high temperature applications. Epic S7478 is UL 94 V-0 recognized in a thin cross section without the use of halogen flame retardants and offers a 140°C RTI recognized by UL. The Epic S7478 works extremely well for LED drivers that must meet the requirements of UL 8750 safety standards for LED equipment in lighting products, damp location drivers, electrical encapsulation, signs and many other electrical potting applications. For more technical information on Epic S7478 please view the brochure below.
Epic TC0118 Series - Electrical Potting Compound
Epic Resins TC0118 series of UL recognized thermally conductive epoxy varnishes come in a variety of viscosities designed to yield the various film thicknesses depending on your application requirements. Epic TC0118 series of products can be used as electrical potting compounds, dip process resins, or VPI resins. The TC0118 product line is part of UL File no. OBJS2.E123927
Epic S7174-03 - 2 Component Epoxy Electrical Potting/Casting System
Epic S7174-03 is a fire resistant, two component, filled epoxy electrical potting and casting system. Epic S7174-03 features a low mixed viscosity, convenient mix ratio and very low shrinkage. This product is an outstanding selection for high voltage power supplies requiring good thermal conductivity. This electrical potting product is UL 94 V-0 recognized at 3 mm.
Epic R1055/H5083 - Epoxy Electrical Potting System
Epic R1055/H5083 is a vacuum grade modified epoxy electrical potting system that is formulated to achieve penetration of tightly wound electrical coils. The system cures at ambient temperatures thereby affording the user the opportunity to reduce substantial energy costs normally associated with heat curing systems. When fully cured, Epic R1055/H5083 potting compound features a combination of good physical and electrical properties that particularly qualify the compound for potting high voltage power supply sources with a UL recognized RTI of 180°C. Epic R1055/H5083 is also UL rated F1 and is suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C.
Epic S7219 - 2 Component Clear Epoxy Potting Compound
Epic S7219 is a two component clear epoxy potting compound designed for the encapsulation of small transformers. S7219 electrical potting compound features a low viscosity and long pot life to provide air bubble-free castings.
Epic S7195A/S7195-01B - 2 Component Filled Epoxy Casting System
EPIC S7195A/S7195-01B is a general purpose, two component, filled epoxy casting system. EPIC S7195 has a convenient 2:1 mix ratio by volume and is colored blue and yellow resulting in a green mixed product.
UL-Certified Flame Retardant Resin
Fire Retardant Epoxy and Polyurethane Compounds
Epic Resins produces a variety of epoxies and polyurethanes designed with fire retardant properties. This flame resistance protects any encased product or part while ensuring normal, stable operation. Here are a few of the fire resistant products we’ve formulated:
EPIC R1055/H5083 UL Recognized Epoxy: Premium fire retardant with UL recognition that is heavy metal free with a 180°C RTI, UL 746 rating of F1 for outdoor exposure and a long work life. This epoxy is an excellent choice for your high temperature potting applications.
EPIC S7527 series UL Recognized Polyurethane: These UL 94 V0 recognized 2 component polyurethane potting compounds were formulated to provide a long gel time at a medium hardness with excellent electrical properties. EPIC S7527 is an excellent choice for potting and encapsulating sensitive electronics that are exposed to harsh environments.
The Value in UL-Certification
Underwriters Laboratories (UL) is a leader in safety sciences and is globally recognized for producing safety solutions. Epic Resins sends many newly formulated epoxies and polyurethanes to UL for testing and certification. When a flame-retardant resin is recognized by UL, it means this resin has been tested and provides safety-related certification to manufacturers and consumers.
The applications for UL-recognized polyurethanes and epoxies are limitless. Numerous industries already use our UL-certified resins, including:
- Automotive Industry
- Solar Power Industry
- LED Lighting Industry
If you think you could benefit by the integration of UL-recognized flame retardant epoxies or polyurethanes, there’s only one name to trust, Epic Resins.
Download > UL-Certified Flame Retardant Resin Sheet